The Risk Assessment report displays all the options selected from the Checklist. The generated information is rendered in the report section "For making the best use of the controls,..."
The following steps illustrate the steps to ‘use the Checklist for a chemical on “Health (ILO)” risk assessment mode.
Steps
- Select the Risk Assessment module button
- Press the ILO or UN tab
- Press the Folder name. Note that the risk assessment grid
will show the list of chemical names and the risk assessment parameters, including the Checklist button 
- Click
the Expand button 
alongside the chemical name - Click
the Locked padlock button 
to unlock the risk assessment for the chemical - Set the risk assessment parameters
- Click
the Controls button and set the recommended level of control - Press the Checklist button
in the risk band column alongside the chemical that is being risk assessed
9. Select the Checklist options that are relevant for the best use of controls by clicking on the red switch button 
to turn it green 
10. Click the Close button 
on the top right corner of the Checklist panel
11. Click
the unlocked padlock button 
to lock 
(save) the risk assessment
12. Click
the Yes button to save the risk assessment
A confirmation message for risk assessment saved successfully will be displayed in the top middle area of the user interface.
Take note that the risk assessment status changes from Assessment Required 
to Assessment Complete 
.
13. Press
the Report button 
from the DOCS column on the far right to render the risk assessment report.
The Risk Assessment Report renders the Checklist information for best use of controls in the section “For making the best use of controls, please follow the checklist below”.
